Crane Training Darwin


Crane Training Darwin is designed to provide participants with the skills and knowledge to safely operate a wide variety of cranes in different working environments.

A list of the Darwin Crane courses that Site Skills Training offers are outlined below.


Gantry Crane (Overhead Crane) Training

This course provides the necessary skills and knowledge to safely and competently operate a pendant controlled overhead crane. Participants will be able to undertake risk assessment and control, pre-start inspections, identify lifting equipment, report and record faults, lift and shift various loads safely, and shut down and stow equipment and cranes as per AS2550, manufacturer instructions and site procedures. This course is for electric overhead cranes with 3 or less movements: South/North, East/West, Up/Down

Standard Course

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Electric Overhead Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

The standard course includes training and assessment. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Electric Overhead Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Mobile Slewing Crane up to 20t (C2) Training

This unit of competency cover the functions required to operate a C2 Slewing Mobile Crane to meet minimum training and assessment standards for the purposes of certification. It includes prestart and post checks, lifts to specifications, mobile loads and transfers.

Standard Course

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
Standard Course

The standard course includes training and assessment. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.

Note a High Risk Work Licence fee of $76 applies above the course cost. This is directly payable to WorkSafe NT.

Mobile Slewing Crane up to 60t (C6) Training

Mobile Slewing Crane up to 60t specifies the outcomes required to operate a slewing mobile crane (up to 60 tonnes) for High Risk Work licensing purposes. It encompasses the C2 licences.

By completing this training and assessment you will be awarded a Statement of Attainment which is required to apply for the High Risk Work Licence class C6.

 

Standard Course

5 Days | $1469

The standard course includes training and assessment. Inclusive of GST if relevant.

Dogging and C6 Crane Package

10 Days | $2490

The course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Mobile Slewing Crane up to 60t Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

5 Days | $1469

The standard course includes training and assessment. Inclusive of GST if relevant.

2017
  • July - 3,31
  • August - 28
  • September - 25
  • October - 23
  • November - 20
  • December - 18
Dogging and C6 Crane Package

10 Days | $2490

The course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Mobile Slewing Crane up to 60t Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence fee of $76 applies above the course cost. This is directly payable to WorkSafe NT.

Mobile Slewing Crane up to 100t (C1) Training

Mobile Slewing Crane up to 100t specifies the outcomes required to operate a slewing mobile crane (up to 100 tonnes) for licensing purposes. It encompasses the requirement for the up to 60 tonnes licence. The course covers safe operation according to Australian and industry standards; slinging and transferring loads, on site communications.

Standard Course

5 Days | $1469

The standard course includes training and assessment. Inclusive of GST if relevant.

Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Mobile Slewing Crane up to 100t Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

5 Days | $1469

The standard course includes training and assessment. Inclusive of GST if relevant.

2017
  • July - 3,31
  • August - 28
  • September - 25
  • October - 23
  • November - 20
  • December - 18
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Mobile Slewing Crane up to 100t Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence fee of $76 applies above the course cost. This is directly payable to WorkSafe NT.

Mobile Slewing Crane over 100t (C0) Training

Mobile Slewing Crane over 100t specifies the outcomes required to operate a slewing mobile crane (over 100 tonnes) for licensing purposes. It encompasses the requirement for the up to 100 tonnes licence.

Standard Course

5 Days | $2479

The standard course includes training and assessment. Inclusive of GST if relevant.

Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Mobile Slewing Crane over 100t Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

5 Days | $2479

The standard course includes training and assessment. Inclusive of GST if relevant.

2017
  • July - 3,31
  • August - 28
  • September - 25
  • October - 23
  • November - 20
  • December - 18
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Mobile Slewing Crane over 100t Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence fee of $76 applies above the course cost. This is directly payable to WorkSafe NT.

Non Slewing Crane (CN) Training

Non Slewing Crane (CN) specifies the outcomes required to operate a mobile crane of greater than 3 tonnes capacity that incorporates a boom or jib which includes articulated type mobile cranes and locomotive cranes, but does not include vehicle tow trucks, for licensing purposes.

Non Slewing Crane (CN) specifies the outcomes required to operate a mobile crane of greater than 3 tonnes capacity that incorporates a boom or jib which includes articulated type mobile cranes and locomotive cranes, but does not include vehicle tow trucks, for licensing purposes.

By completing this training and assessment you will be awarded a Statement of Attainment which is required to apply for the High Risk Work Licence class CN.

 

Standard Course

5 Days | $1315

The standard course includes training and assessment. Inclusive of GST if relevant.

Dogging and Non-Slewing Crane (CN) Package

10 Days | $2351

The course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Non Slewing Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

5 Days | $1315

The standard course includes training and assessment. Inclusive of GST if relevant.

2016
  • November - 28
2017
  • July - 10
  • September - 4
  • October - 30
Dogging and Non-Slewing Crane (CN) Package

10 Days | $2351

The course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Non Slewing Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence fee of $76 applies above the course cost. This is directly payable to WorkSafe NT.

Operate Offshore Crane Training

The Operate Offshore Crane course is aimed at providing participants with the necessary skills and knowledge to operate an offshore crane safely and efficiently. An offshore crane may include the following crane types on an FPSO, MODU, Fixed platforms, dive vessels and FSU's:

  • Derrick
  • Slewing Pedestal
  • Bridge and Gantry
  • Knuckleboom
  • Mobile Slewing Crane

Generally the crane operator would liaise and cooperate with other members of the facility onboard team and would also respond to information from crew on a support vessel. Actions may include transfer of equipment to and from the support vessel; transfer of personnel between the facility and another vessel using appropriate approved equipment; and safe management of loads during diving operations.

This training is recommended by the National Offshore Petroleum Safety Environment Management Authority (NOPSEMA) as outlined in the N-09000-GN0955 Guidance

Standard Course

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Operate Offshore Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

The standard course includes training and assessment. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Operate Offshore Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence fee of $76 applies above the course cost. This is directly payable to WorkSafe NT.

Tower Crane (CT) Training

This unit specifies the outcomes required to operate a tower crane for licensing purposes, and covers a jib or boom/job crane mounted on a tower structure, demountable or permanent, including both horizontal and luffing jib types. This unit does not cover self-erecting tower cranes.

Standard Course

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Tower Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

The standard course includes training and assessment. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Tower Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence fee of $76 applies above the course cost. This is directly payable to WorkSafe NT.

Vehicle Loading Crane (CV) Training

Vehicle Loading Crane specifies the outcomes required to operate a vehicle loading crane with a capacity of 10 metre tonnes or more, mounted on a vehicle for the principle purpose of loading and unloading such a vehicle, including the application of load estimation and slinging techniques to move a load, for licensing purposes.

Standard Course

4 Days | $999

The standard course includes training and assessment. Inclusive of GST if relevant.

Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Vehicle Loading Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

4 Days | $999

The standard course includes training and assessment. Inclusive of GST if relevant.

2017
  • August - 8
  • October - 2
  • November - 27
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Vehicle Loading Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence fee of $76 applies above the course cost. This is directly payable to WorkSafe NT.

Dogging and Mobile Slewing Crane (C6) Training Package

This training package includes both CPCCLDG3001A Licence to perform dogging and TLILIC4009 Licence to operate a slewing mobile crane (up to 60 tonnes). Courses may not run consecutively.

Dogging Training

This course aims to give participants the necessary skills and knowledge to safely and efficiently undertake dogging work in a range of working environments.

On completion, candidates will be able to competently undertake:

  • a range of slinging techniques;
  • select and inspect lifting gear and equipment;
  • direct crane operators in the safe movement and placement of loads including out of view of the crane operator.

The course also covers:

  • applicable legislations and standards;
  • risk management procedures relating to lifting operations;
  • crane types,
  • uses and characteristics;
  • crane set up and other elements of crane and dogging operations.

Mobile Slewing Crane up to 60t (C6) Training

This unit specifies the outcomes required to operate a slewing mobile crane (up to 60 tonnes) for licensing purposes. It encompasses the requirement for the up to 20 tonnes licence.

Dogging and Mobile Slewing Crane (C6) Package

10 Days | $2490

5 days per course. Enrolment date is for Dogging and courses may not run consecutively. You will be contacted to confirm both dates once receiving your application.

Mobile Slewing Crane up to 60t (C6)

5 Days | $1469

delivery_type_no_date_descriptionCLICK HERE for more information about this course and to book online.
Dogging - Standard Course

5 Days | $1299

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this course and to book online.
VOC

Voc can be provided for this course

Dogging and Mobile Slewing Crane up to 60t Training Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Dogging and Mobile Slewing Crane (C6) Package

10 Days | $2490

5 days per course. Enrolment date is for Dogging and courses may not run consecutively. You will be contacted to confirm both dates once receiving your application.

2017
Mobile Slewing Crane up to 60t (C6)

5 Days | $1469

CLICK HERE for more information about this course and to book online.
Dogging - Standard Course

5 Days | $1299

The standard course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this course and to book online.
VOC

Voc can be provided for this course

Dogging and Mobile Slewing Crane up to 60t Training Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Dogging and Non Slewing Crane (CN) Training Package

This training package includes both CPCCLDG3001A Licence to perform dogging Training and TLILIC3006 Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity). Courses may not run consecutively.

Dogging Training

This course aims to give participants the necessary skills and knowledge to safely and efficiently undertake dogging work in a range of working environments.

On completion, candidates will be able to competently undertake

  • a range of slinging techniques;
  • select and inspect lifting gear and equipment;
  • direct crane operators in the safe movement and placement of loads including out of view of the crane operator.

The course also covers:

  • applicable legislations and standards;
  • risk management procedures relating to lifting operations;
  • crane types,
  • uses and characteristics;
  • crane set up and other elements of crane and dogging operations.

Non Slewing Crane (CN) Training

Non Slewing Crane (CN) specifies the outcomes required to operate a mobile crane of greater than 3 tonnes capacity that incorporates a boom or jib which includes articulated type mobile cranes and locomotive cranes, but does not include vehicle tow trucks, for licensing purposes.

Dogging and Non Slewing Crane (CN) Package

10 Days | $2351

5 days per course. Enrolment date is for Dogging and courses may not run consecutively. You will be contacted to confirm both dates once receiving your application.

Non-Slewing Crane (CN) - Standard Course

5 Days | $1315

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this course and to book online.
Dogging - Standard Course

5 Days | $1299

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this course and to book online.
VOC

Voc can be provided for this course

Dogging and Non Slewing Crane Training Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Dogging and Non Slewing Crane (CN) Package

10 Days | $2351

5 days per course. Enrolment date is for Dogging and courses may not run consecutively. You will be contacted to confirm both dates once receiving your application.

2017
Non-Slewing Crane (CN) - Standard Course

5 Days | $1315

The standard course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this course and to book online.
Dogging - Standard Course

5 Days | $1299

The standard course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this course and to book online.
VOC

Voc can be provided for this course

Dogging and Non Slewing Crane Training Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.