Crane Training Perth


Crane Training Perth is designed to provide participants with the skills and knowledge to safely operate a wide variety of cranes in different working environments.

A list of the Perth Crane courses that Site Skills Training offers are outlined below.


Gantry Crane (Overhead Crane) Training

Gantry Crane (Overhead Crane) Training provides the necessary skills and knowledge to safely and competently operate a pendant controlled overhead crane. Participants will be able to undertake risk assessment and control, pre-start inspections, identify lifting equipment, report and record faults, lift and shift various loads safely, and shut down and stow equipment and cranes as per AS2550, manufacturer instructions and site procedures. This course is for electric overhead cranes with 3 or less movements: South/North, East/West, Up/Down

Standard Course

1 Day | $350

The standard course includes training and assessment. Inclusive of GST if relevant.

Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Electric Overhead Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

1 Day | $350

The standard course includes training and assessment. Inclusive of GST if relevant.

2018
  • December - 10
2019
  • January - 14
  • February - 11
  • March - 11
  • April - 8
  • May - 6
2020
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Electric Overhead Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Mobile Slewing Crane up to 60t (C6) Training

This unit specifies the outcomes required to operate a slewing mobile crane (up to 60 tonnes) for licensing purposes. It encompasses the requirement for the up to 20 tonnes licence.

Standard Course

5 Days | $1870

The standard course includes training and assessment. Inclusive of GST if relevant.

Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Mobile Slewing Crane up to 60t Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

5 Days | $1870

The standard course includes training and assessment. Inclusive of GST if relevant.

2018
  • November - 26
  • December - 17
2019
  • January - 29
  • February - 25
  • March - 25
  • April - 15
  • May - 20
  • June - 17
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Mobile Slewing Crane up to 60t Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.

Mobile Slewing Crane up to 100t (C1) Training

This unit specifies the outcomes required to operate a slewing mobile crane (up to 100 tonnes) for licensing purposes. It encompasses the requirement for the up to 100 tonnes licence. The course covers safe operation according to Australian and industry standards; slinging and transferring loads, on site communications.

Standard Course

5 Days | $2365

The standard course includes training and assessment. Inclusive of GST if relevant.

Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Mobile Slewing Crane up to 100t Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

5 Days | $2365

The standard course includes training and assessment. Inclusive of GST if relevant.

2018
  • November - 26
  • December - 17
2019
  • January - 29
  • February - 25
  • March - 25
  • April - 15
  • May - 20
  • June - 17
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Mobile Slewing Crane up to 100t Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.

Mobile Slewing Crane over 100t (C0) Training

This unit specifies the outcomes required to operate a slewing mobile crane (over 100 tonnes) for licensing purposes. It encompasses the requirement for the up to 100 tonnes licence.

Standard Course

5 Days | $2365

The standard course includes training and assessment. Inclusive of GST if relevant.

Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Mobile Slewing Crane over 100t Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

5 Days | $2365

The standard course includes training and assessment. Inclusive of GST if relevant.

2018
  • November - 26
  • December - 17
2019
  • January - 29
  • February - 25
  • March - 25
  • April - 15
  • May - 20
  • June - 17
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Mobile Slewing Crane over 100t Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.

Non Slewing Crane (CN) Training

Non Slewing Crane specifies the outcomes required to operate a mobile crane of greater than 3 tonnes capacity that incorporates a boom or jib which includes articulated type mobile cranes and locomotive cranes, but does not include vehicle tow trucks, for licensing purposes.

Standard Course

5 Days | $1065

The standard course includes training and assessment. Inclusive of GST if relevant.

VOC

Voc can be provided for this course

Non Slewing Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

5 Days | $1065

The standard course includes training and assessment. Inclusive of GST if relevant.

2018
  • December - 10
2019
  • January - 14
  • February - 11
  • March - 11
  • April - 8
  • May - 6
  • June - 4
VOC

Voc can be provided for this course

Non Slewing Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.

Vehicle Loading Crane (CV) Training

Vehicle Loading Crane specifies the outcomes required to operate a vehicle loading crane with a capacity of 10 metre tonnes or more, mounted on a vehicle for the principle purpose of loading and unloading such a vehicle, including the application of load estimation and slinging techniques to move a load, for licensing purposes.

Rio Tinto CV Course Overview:

The Rio Tinto CV Course is for all Rio Tinto Clients and is run over a 5 day period as requested by Rio Tinto. The course content is the same however participants will go through Rio Tinto’s JHA & lifting procedures relevant to Vehicle Loading Crane Operation.

Standard Course

4 Days | $775

The standard course includes training and assessment. Inclusive of GST if relevant.

VOC

Voc can be provided for this course

Vehicle Loading Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

4 Days | $775

The standard course includes training and assessment. Inclusive of GST if relevant.

2018
  • December - 3
2019
  • January - 7
  • February - 4
  • March - 5
  • April - 1,29
  • May - 27
  • June - 24
VOC

Voc can be provided for this course

Vehicle Loading Crane Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.

Dogging and Mobile Slewing Crane (C6) Training Package

This training package includes both CPCCLDG3001A Licence to perform dogging and TLILIC4009 Licence to operate a slewing mobile crane (up to 60 tonnes). Courses may not run consecutively.

Dogging Training

This course aims to give participants the necessary skills and knowledge to safely and efficiently undertake dogging work in a range of working environments.

On completion, candidates will be able to competently undertake:

  • a range of slinging techniques;
  • select and inspect lifting gear and equipment;
  • direct crane operators in the safe movement and placement of loads including out of view of the crane operator.

The course also covers:

  • applicable legislations and standards;
  • risk management procedures relating to lifting operations;
  • crane types,
  • uses and characteristics;
  • crane set up and other elements of crane and dogging operations.

Mobile Slewing Crane up to 60t (C6) Training

This unit specifies the outcomes required to operate a slewing mobile crane (up to 60 tonnes) for licensing purposes. It encompasses the requirement for the up to 20 tonnes licence.

VOC

Voc can be provided for this course

Dogging and Mobile Slewing Crane up to 60t Training Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

10 Days | $2500

The Standard course includes the assessment. Inclusive of GST if relevant.

2018 2019
VOC

Voc can be provided for this course

Dogging and Mobile Slewing Crane up to 60t Training Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Mobile Slewing Crane up to 20t (C2) Training

Mobile Slewing Crane up to 20t (C2) covers the functions required to operate a C2 Slewing Mobile Crane to meet minimum training and assessment standards for the purposes of certification. It includes pre-start and post checks, lifts to specifications, mobile loads and transfers.

Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.

Tower Crane Training (CT)

Tower Crane (CT) specifies the outcomes required to operate a tower crane for licensing purposes, and covers a jib or boom/job crane mounted on a tower structure, demountable or permanent, including both horizontal and luffing jib types. This unit does not cover self-erecting tower cranes.

Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.