Dogging & Rigging Training

Dogging and Rigging Training provides students with the fundamental skills of dogging and working around cranes and undertaking up to advanced rigging work.

A list of the Dogging and Rigging courses that Site Skills Training offers are outlined below.

Dogging and Advanced Rigging Training Package

This training package includes the below courses which will be delivered in the below order for prerequisite purposes:

  1. CPCCLDG3001A Licence to perform dogging
  2. CPCCLRG3001A Licence to perform rigging basic level
  3. CPCCLRG3002A Licence to perform rigging intermediate level
  4. CPCCLRG4001A Licence to perform rigging advanced level

Please note, these courses may not run consecutively.

Dogging Training

This course aims to give participants the necessary skills and knowledge to safely and efficiently undertake dogging work in a range of working environments.

On completion, candidates will be able to competently undertake

  • a range of slinging techniques;
  • select and inspect lifting gear and equipment;
  • direct crane operators in the safe movement and placement of loads including out of view of the crane operator.

The course also covers:

  • applicable legislations and standards;
  • risk management procedures relating to lifting operations;
  • crane types,
  • uses and characteristics;
  • crane set up and other elements of crane and dogging operations.

Rigging Basic Training

This course is designed to give participants the necessary skills and knowledge to undertake Basic Rigging work safely and competently. On completion, candidates will be able to undertake steel erection; erect hoists (including mast climbing hoists); place pre-cast concrete; move plant and equipment using a variety of means including skates, chain blocks, tirfors and other means; install safety nets and static lines; install perimeter safety screens and shutters; and, install cantilever crane loading platforms. Candidates will also gain a sound knowledge of applicable legislations and standards and risk management associated with related to Basic Rigging operations.

Rigging Intermediate Training

This unit specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and also includes rigging of cranes, rigging of conveyors, rigging of dredges and excavators, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes.

Rigging Advanced Training

This course specifies the outcomes required to perform rigging work at the advanced level and includes the rigging of gin poles, shear legs, flying fox and cable ways, guyed derricks and structures and suspended scaffolds and fabricated hung scaffolds for licensing purposes.

Intermediate and Advanced Rigging Training Package

This training package includes both CPCCLRG3002A Licence to perform rigging intermediate level and CPCCLRG4001A Licence to perform rigging advanced level. Intermediate Rigging Training will be delivered as the first course as it is a prerequisite to Advanced Rigging Training. Courses may not run consecutively.

Rigging Intermediate Training

This unit specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and also includes rigging of cranes, rigging of conveyors, rigging of dredges and excavators, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes.

Rigging Advanced Training

This course specifies the outcomes required to perform rigging work at the advanced level and includes the rigging of gin poles, shear legs, flying fox and cable ways, guyed derricks and structures and suspended scaffolds and fabricated hung scaffolds for licensing purposes.

Dogging and Mobile Slewing Crane (C6) Training Package

Dogging Training

This course aims to give participants the necessary skills and knowledge to safely and efficiently undertake dogging work in a range of working environments.

On completion, candidates will be able to competently undertake

  • a range of slinging techniques;
  • select and inspect lifting gear and equipment;
  • direct crane operators in the safe movement and placement of loads including out of view of the crane operator.

The course also covers:

  • applicable legislations and standards;
  • risk management procedures relating to lifting operations;
  • crane types,
  • uses and characteristics;
  • crane set up and other elements of crane and dogging operations.

Mobile Slewing Crane up to 60t (C6) Training

This unit specifies the outcomes required to operate a slewing mobile crane (up to 60 tonnes) for licensing purposes. It encompasses the requirement for the up to 20 tonnes licence.

Dogging and Non Slewing Crane (CN) Training Package

Dogging Training

This course aims to give participants the necessary skills and knowledge to safely and efficiently undertake dogging work in a range of working environments.

On completion, candidates will be able to competently undertake

  • a range of slinging techniques;
  • select and inspect lifting gear and equipment;
  • direct crane operators in the safe movement and placement of loads including out of view of the crane operator.

The course also covers:

  • applicable legislations and standards;
  • risk management procedures relating to lifting operations;
  • crane types,
  • uses and characteristics;
  • crane set up and other elements of crane and dogging operations.

Non Slewing Crane (CN) Training

Non Slewing Crane (CN) specifies the outcomes required to operate a mobile crane of greater than 3 tonnes capacity that incorporates a boom or jib which includes articulated type mobile cranes and locomotive cranes, but does not include vehicle tow trucks, for licensing purposes.

Dogging and Basic Rigging Training Package

This training package includes both CPCCLDG3001A Licence to Perform Dogging and CPCCLRG3001A Licence to Perform Rigging Basic Level. Dogging Training will be delivered as the first course as it is a prerequisite to Basic Rigging Training. Courses may not run consecutively.

Dogging Training

This course aims to give participants the necessary skills and knowledge to safely and efficiently undertake dogging work in a range of working environments.

On completion, candidates will be able to competently undertake

  • a range of slinging techniques;
  • select and inspect lifting gear and equipment;
  • direct crane operators in the safe movement and placement of loads including out of view of the crane operator.

The course also covers:

  • applicable legislations and standards;
  • risk management procedures relating to lifting operations;
  • crane types,
  • uses and characteristics;
  • crane set up and other elements of crane and dogging operations.

Rigging Basic Training

Basic Rigging (RB) is designed to give participants the necessary skills and knowledge to undertake Basic Rigging work safely and competently.

On completion, candidates will be able to undertake:

  • steel erection;
  • erect hoists (including mast climbing hoists);
  • place pre-cast concrete;
  • move plant and equipment using a variety of means including skates,
  • chain blocks,
  • tirfors and other means;
  • install safety nets and static lines;
  • install perimeter safety screens and shutters; and,
  • install cantilever crane loading platforms.

Basic and Intermediate Rigging Training Package

This training package includes both CPCCLR3001A Licence to perform rigging basic level and CPCCLRG3002A Licence to perform rigging intermediate level. Rigging Basic Training will be delivered as the first course as it is a prerequisite to Rigging Intermediate. Courses may not run consecutively.

Rigging Basic Training

This course is designed to give participants the necessary skills and knowledge to undertake Basic Rigging work safely and competently. On completion, candidates will be able to undertake steel erection; erect hoists (including mast climbing hoists); place pre-cast concrete; move plant and equipment using a variety of means including skates, chain blocks, tirfors and other means; install safety nets and static lines; install perimeter safety screens and shutters; and, install cantilever crane loading platforms. Candidates will also gain a sound knowledge of applicable legislations and standards and risk management associated with related to Basic Rigging operations.

Rigging Intermediate Training

This unit specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and also includes rigging of cranes, rigging of conveyors, rigging of dredges and excavators, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes.

Dogging Training

This course aims to give participants the necessary skills and knowledge to safely and efficiently undertake dogging work in a range of working environments. On completion, candidates will be able to competently undertake a range of slinging techniques; select and inspect lifting gear and equipment; direct crane operators in the safe movement and placement of loads including out of view of the crane operator. The course also covers applicable legislations and standards; risk management procedures relating to lifting operations; crane types, uses and characteristics; crane set up and other elements of crane and dogging operations.

By completing this training and assessment you will be awarded the High Risk Licence class DG.

Basic Rigging Training

This course is designed to give participants the necessary skills and knowledge to undertake Basic Rigging work safely and competently. On completion, candidates will be able to undertake steel erection; erect hoists (including mast climbing hoists); place pre-cast concrete; move plant and equipment using a variety of means including skates, chain blocks, tirfors and other means; install safety nets and static lines; install perimeter safety screens and shutters; and, install cantilever crane loading platforms. Candidates will also gain a sound knowledge of applicable legislations and standards and risk management associated with related to Basic Rigging operations. By completing this training and assessment you will be awarded the High Risk Licence class RB.

Intermediate Rigging Training

This unit specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and also includes rigging of cranes, rigging of conveyors, rigging of dredges and excavators, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes.

Advanced Rigging Training

The Advanced Rigging Sunshine Coast course specifies the outcomes required to perform rigging work at the advanced level. This includes

  • All the outcomes for rigging work at the basic and intermediate levels
  • Rigging of
    • gin poles
    • shear legs
    • flying foxes and cable ways
    • guyed derricks and structures
    • suspended scaffolds and fabricated hung scaffolds for licensing purposes

Identify Requirements for Safe Tilt-Up Work Training

Safe Tilt-Up Work aims to give participants the necessary knowledge to perform tilt-up work safely and efficiently. The course is designed for any person entering and working on a site where tilt-up panels are being erected or constructed. The course complies with the requirements of the tilt-up work induction training within the construction industry.

Frequently Asked Questions

How to get a riggers ticket?

Do I need to do Dogging before Basic Rigging?

Do I need to do Basic Rigging before Intermediate Rigging?

Do I need to do Intermediate Rigging before Advanced Rigging?