Dogging & Rigging Training Brisbane


Dogging and Rigging Training Brisbane provides students with the fundamental skills of dogging and working around cranes and undertaking up to advanced rigging work.

A list of the Brisbane Dogging and Rigging courses that Site Skills Training Brisbane offers are outlined below.


Dogman Ticket

Dogging training Brisbane aims to give participants the necessary skills and knowledge to safely and efficiently undertake dogging work in a range of working environments to gain their dogman ticket.

On completion, candidates will be able to competently undertake

  • a range of slinging techniques;
  • select and inspect lifting gear and equipment;
  • direct crane operators in the safe movement and placement of loads including out of view of the crane operator.

The dogman course also covers:

  • applicable legislations and standards;
  • risk management procedures relating to lifting operations;
  • crane types,
  • uses and characteristics;
  • crane set up and other elements of crane and dogging operations.

Standard Course - Brisbane Southside

5 Days | $1190

The standard course includes training and assessment. Inclusive of GST if relevant.

Night Course

5 Nights | $1190

The Night course is for the Standard course only. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information. For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Dogging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

CSQ Funding

5 Days | $590

This course is available to those who meet CSQ Funding Eligibility.

2018
Standard Course - Brisbane Southside

5 Days | $1190

The standard course includes training and assessment. Inclusive of GST if relevant.

2018
Night Course

5 Nights | $1190

The Night course is for the Standard course only. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information. For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Dogging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

CSQ Funding

Site Skills Training is working with CSQ in providing courses that fall under the Construction Skills Queensland initiative to upskill construction workers in Queensland at a reduced price.

Eligibility Requirements:

Applicants must work or had worked in the building and construction industry in the las 6 months.

Must be an Australia or New Zealand citizen; or permanent resident of Australia; or a refugee and humanitarian visa holder.

And, must permanently reside in Queensland; or be permanently in Queensland.

To view all courses available under CSQ funding and more information on eligibility, click here.

Basic Rigging Training

Basic Rigging (RB) is designed to give participants the necessary skills and knowledge to undertake Basic Rigging work safely and competently.

On completion, candidates will be able to undertake:

  • steel erection;
  • erect hoists (including mast climbing hoists);
  • place pre-cast concrete;
  • move plant and equipment using a variety of means including skates,
  • chain blocks,
  • tirfors and other means;
  • install safety nets and static lines;
  • install perimeter safety screens and shutters; and,
  • install cantilever crane loading platforms.

Candidates will also gain a sound knowledge of applicable legislation and standards and risk management associated with related to Basic Rigging operations.

CSQ Funding

5 Days | $1049

This course is available to those who meet CSQ Funding Eligibility.

Standard Course - Brisbane Southside

5 Days | $1649

The standard course includes training and assessment. Inclusive of GST if relevant.

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Basic Rigging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

CSQ Funding

5 Days | $1049

This course is available to those who meet CSQ Funding Eligibility.

2018
Standard Course - Brisbane Southside

5 Days | $1649

The standard course includes training and assessment. Inclusive of GST if relevant.

2018
Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Basic Rigging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence fee of $85.40 applies above the course cost. This is directly payable to Workplace Health and Safety QLD.

CSQ Funding

Site Skills Training is working with CSQ in providing courses that fall under the Construction Skills Queensland initiative to upskill construction workers in Queensland at a reduced price.

Eligibility Requirements:

Applicants must work or had worked in the building and construction industry in the las 6 months.

Must be an Australia or New Zealand citizen; or permanent resident of Australia; or a refugee and humanitarian visa holder.

And, must permanently reside in Queensland; or be permanently in Queensland.

To view all courses available under CSQ funding and more information on eligibility, click here.

Intermediate Rigging Training

This unit specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and also includes rigging of cranes, rigging of conveyors, rigging of dredges and excavators, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes.

CSQ Funding

5 Days | $1625

This course is available to those who meet CSQ Funding Eligibility.

Standard Course - Brisbane Southside

5 Days | $1850

The standard course includes training and assessment. Inclusive of GST if relevant.

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Intermediate Rigging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

CSQ Funding

5 Days | $1625

This course is available to those who meet CSQ Funding Eligibility.

2018
  • January - 29
  • February - 26
  • April - 9
  • May - 8
  • June - 4
Standard Course - Brisbane Southside

5 Days | $1850

The standard course includes training and assessment. Inclusive of GST if relevant.

2018
  • January - 29
  • February - 26
  • April - 9
  • May - 8
  • June - 4
Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Intermediate Rigging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence fee of $85.40 applies above the course cost. This is directly payable to Workplace Health and Safety QLD.

CSQ Funding

Site Skills Training is working with CSQ in providing courses that fall under the Construction Skills Queensland initiative to upskill construction workers in Queensland at a reduced price.

Eligibility Requirements:

Applicants must work or had worked in the building and construction industry in the las 6 months.

Must be an Australia or New Zealand citizen; or permanent resident of Australia; or a refugee and humanitarian visa holder.

And, must permanently reside in Queensland; or be permanently in Queensland.

To view all courses available under CSQ funding and more information on eligibility, click here.

Advanced Rigging Training

The Advanced Rigging Brisbane course specifies the outcomes required to perform rigging work at the advanced level.

This course includes the rigging of:

  • gin poles
  • shear legs
  • flying foxes and cable ways
  • guyed derricks and structures
  • suspended scaffolds and fabricated hung scaffolds for licensing purposes

Standard Course - Brisbane Southside

5 Days | $1849

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Advanced Rigging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course - Brisbane Southside

5 Days | $1849

The standard course includes training and assessment. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Advanced Rigging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence fee of $85.40 applies above the course cost. This is directly payable to Workplace Health and Safety QLD.

Frequently Asked Questions

How to get a riggers ticket?

Do I need to do Dogging before Basic Rigging?

Do I need to do Basic Rigging before Intermediate Rigging?

Do I need to do Intermediate Rigging before Advanced Rigging?