Dogging & Rigging Training Perth


Dogging and Rigging Training Perth provides students with the fundamental skills of dogging and working around cranes and undertaking up to advanced rigging work.

A list of the Perth Dogging and Rigging courses that Site Skills Training Perth offers are outlined below.


Dogging and Advanced Rigging Training Package

This training package includes the below courses which will be delivered in the below order for prerequisite purposes:

  1. CPCCLDG3001A Licence to perform dogging
  2. CPCCLRG3001A Licence to perform rigging basic level
  3. CPCCLRG3002A Licence to perform rigging intermediate level
  4. CPCCLRG4001A Licence to perform rigging advanced level

Please note, these courses may not run consecutively.

Dogging Training

This course aims to give participants the necessary skills and knowledge to safely and efficiently undertake dogging work in a range of working environments.

On completion, candidates will be able to competently undertake

  • a range of slinging techniques;
  • select and inspect lifting gear and equipment;
  • direct crane operators in the safe movement and placement of loads including out of view of the crane operator.

The course also covers:

  • applicable legislations and standards;
  • risk management procedures relating to lifting operations;
  • crane types,
  • uses and characteristics;
  • crane set up and other elements of crane and dogging operations.

Rigging Basic Training

This course is designed to give participants the necessary skills and knowledge to undertake Basic Rigging work safely and competently. On completion, candidates will be able to undertake steel erection; erect hoists (including mast climbing hoists); place pre-cast concrete; move plant and equipment using a variety of means including skates, chain blocks, tirfors and other means; install safety nets and static lines; install perimeter safety screens and shutters; and, install cantilever crane loading platforms. Candidates will also gain a sound knowledge of applicable legislations and standards and risk management associated with related to Basic Rigging operations.

Rigging Intermediate Training

This unit specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and also includes rigging of cranes, rigging of conveyors, rigging of dredges and excavators, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes.

Rigging Advanced Training

This course specifies the outcomes required to perform rigging work at the advanced level and includes the rigging of gin poles, shear legs, flying fox and cable ways, guyed derricks and structures and suspended scaffolds and fabricated hung scaffolds for licensing purposes.

Dogging - Standard Course

5 Days | $865

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this course and to book online.
Basic Rigging - Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this course and to book online.
Intermediate Rigging - Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this course and to book online.
Advanced Rigging - Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this course and to book online.
VOC

Voc can be provided for this course

Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Dogging and Advanced Rigging Package

20 Days | $3140

5 days per course. Enrolment date is for Dogging and courses may not run consecutively. You will be contacted to confirm dates once receiving your application.

2018 2019
Dogging - Standard Course

5 Days | $865

The standard course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this course and to book online.
Basic Rigging - Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this course and to book online.
Intermediate Rigging - Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this course and to book online.
Advanced Rigging - Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this course and to book online.
VOC

Voc can be provided for this course

Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.

Dogging and Basic Rigging Training Package

This training package includes both CPCCLDG3001A Licence to Perform Dogging and CPCCLRG3001A Licence to Perform Rigging Basic Level. Dogging Training will be delivered as the first course as it is a prerequisite to Basic Rigging Training. Courses may not run consecutively.

Dogging Training

This course aims to give participants the necessary skills and knowledge to safely and efficiently undertake dogging work in a range of working environments.

On completion, candidates will be able to competently undertake

  • a range of slinging techniques;
  • select and inspect lifting gear and equipment;
  • direct crane operators in the safe movement and placement of loads including out of view of the crane operator.

The course also covers:

  • applicable legislations and standards;
  • risk management procedures relating to lifting operations;
  • crane types,
  • uses and characteristics;
  • crane set up and other elements of crane and dogging operations.

Rigging Basic Training

Basic Rigging (RB) is designed to give participants the necessary skills and knowledge to undertake Basic Rigging work safely and competently.

On completion, candidates will be able to undertake:

  • steel erection;
  • erect hoists (including mast climbing hoists);
  • place pre-cast concrete;
  • move plant and equipment using a variety of means including skates,
  • chain blocks,
  • tirfors and other means;
  • install safety nets and static lines;
  • install perimeter safety screens and shutters; and,
  • install cantilever crane loading platforms.

Dogging - Standard Course

5 Days | $865

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this course and to book online.
Basic Rigging - Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this course and to book online.
VOC

Voc can be provided for this course

Dogging and Basic Rigging Training Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Dogging and Basic Rigging Package

10 Days | $1566

5 days per course. Enrolment date is for Dogging and courses may not run consecutively. You will be contacted to confirm both dates once receiving your application.

2018 2019
Dogging - Standard Course

5 Days | $865

The standard course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this course and to book online.
Basic Rigging - Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this course and to book online.
VOC

Voc can be provided for this course

Dogging and Basic Rigging Training Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.

Dogging and Mobile Slewing Crane (C6) Training Package

This training package includes both CPCCLDG3001A Licence to perform dogging and TLILIC4009 Licence to operate a slewing mobile crane (up to 60 tonnes). Courses may not run consecutively.

Dogging Training

This course aims to give participants the necessary skills and knowledge to safely and efficiently undertake dogging work in a range of working environments.

On completion, candidates will be able to competently undertake:

  • a range of slinging techniques;
  • select and inspect lifting gear and equipment;
  • direct crane operators in the safe movement and placement of loads including out of view of the crane operator.

The course also covers:

  • applicable legislations and standards;
  • risk management procedures relating to lifting operations;
  • crane types,
  • uses and characteristics;
  • crane set up and other elements of crane and dogging operations.

Mobile Slewing Crane up to 60t (C6) Training

This unit specifies the outcomes required to operate a slewing mobile crane (up to 60 tonnes) for licensing purposes. It encompasses the requirement for the up to 20 tonnes licence.

VOC

Voc can be provided for this course

Dogging and Mobile Slewing Crane up to 60t Training Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

10 Days | $2500

The Standard course includes the assessment. Inclusive of GST if relevant.

2018 2019
VOC

Voc can be provided for this course

Dogging and Mobile Slewing Crane up to 60t Training Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Dogging Training

Dogging Training aims to give participants the necessary skills and knowledge to safely and efficiently undertake dogging work in a range of working environments to gain their dogman licence.

On completion, candidates will be able to competently undertake

  • a range of slinging techniques;
  • select and inspect lifting gear and equipment;
  • direct crane operators in the safe movement and placement of loads including out of view of the crane operator.

The Dogging Course also covers:

  • applicable legislations and standards;
  • risk management procedures relating to lifting operations;
  • crane types,
  • uses and characteristics;
  • crane set up and other elements of crane and dogging operations.

Dogging and Basic Rigging Package

10 Days | $1566

The course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this training package and to book online.
Dogging and Advanced Rigging Package

20 Days | $3140

The course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
Standard Course

5 Days | $865

The standard course includes training and assessment. Inclusive of GST if relevant.

2018 2019
Dogging and Basic Rigging Package

10 Days | $1566

The course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this training package and to book online.
Dogging and Advanced Rigging Package

20 Days | $3140

The course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.

Basic Rigging Training

Basic Rigging (RB) is designed to give participants the necessary skills and knowledge to undertake Basic Rigging work safely and competently.

On completion, candidates will be able to undertake:

  • steel erection;
  • erect hoists (including mast climbing hoists);
  • place pre-cast concrete;
  • move plant and equipment using a variety of means including skates,
  • chain blocks,
  • tirfors and other means;
  • install safety nets and static lines;
  • install perimeter safety screens and shutters; and,
  • install cantilever crane loading platforms.

Candidates will also gain a sound knowledge of applicable legislation and standards and risk management associated with related to Basic Rigging operations.

If you are competent at the completion of your course you will complete the assessment and be awarded a Statement of attainment. For further information on the High Risk Licencing Process, please click here

Dogging and Basic Rigging Package

10 Days | $1566

The course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Basic Rigging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

2018 2019
Dogging and Basic Rigging Package

10 Days | $1566

The course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Basic Rigging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.

Intermediate Rigging Training

Intermediate Rigging specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and also includes rigging of cranes, rigging of conveyors, rigging of dredges and excavators, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes.

Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

Intermediate and Advanced Rigging Package

6 Days | $1599

The course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this training package and to book online.
Dogging and Advanced Rigging Package

20 Days | $3140

The course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Intermediate Rigging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

2018
  • December - 3
2019
  • January - 7
  • February - 4
  • March - 5
  • April - 1,29
  • June - 24
Intermediate and Advanced Rigging Package

6 Days | $1599

The course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this training package and to book online.
Dogging and Advanced Rigging Package

20 Days | $3140

The course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Intermediate Rigging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.

Advanced Rigging Training

The Advanced Rigging Perth course specifies the outcomes required to perform rigging work at the advanced level.

This course includes the rigging off:

  • gin poles
  • shear legs
  • flying foxes and cable ways
  • guyed derricks and structures
  • suspended scaffolds and fabricated hung scaffolds for licensing purposes

Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Intermediate and Advanced Rigging Package

6 Days | $1599

The course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this training package and to book online.
Dogging and Advanced Rigging Package

20 Days | $3140

The course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Advanced Rigging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Intermediate and Advanced Rigging Package

6 Days | $1599

The course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this training package and to book online.
Dogging and Advanced Rigging Package

20 Days | $3140

The course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Advanced Rigging Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.

Identify Requirements for Safe Tilt-Up Work Training

Safe Tilt-Up Work aims to give participants the necessary knowledge to perform tilt-up work safely and efficiently. The course is designed for any person entering and working on a site where tilt-up panels are being erected or constructed. The course complies with the requirements of the tilt-up work induction training within the construction industry.

Standard Course

5 hours | $250

The standard course includes training and assessment. Inclusive of GST if relevant.

Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
Standard Course

5 hours | $250

The standard course includes training and assessment. Inclusive of GST if relevant.

2018
  • November - 26
  • December - 10
2019
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.

Intermediate and Advanced Rigging Training Package

This training package includes both CPCCLRG3002A Licence to perform rigging intermediate level and CPCCLRG4001A Licence to perform rigging advanced level. Intermediate Rigging Training will be delivered as the first course as it is a prerequisite to Advanced Rigging Training. Courses may not run consecutively.

Rigging Intermediate Training

This unit specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and also includes rigging of cranes, rigging of conveyors, rigging of dredges and excavators, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes.

Rigging Advanced Training

This course specifies the outcomes required to perform rigging work at the advanced level and includes the rigging of gin poles, shear legs, flying fox and cable ways, guyed derricks and structures and suspended scaffolds and fabricated hung scaffolds for licensing purposes.

Intermediate and Advanced Rigging Package

6 Days | $1599

3 days per course. Enrolment date is for Intermediate Rigging and courses may not run consecutively. You will be contacted to confirm both dates once receiving your application.

Advanced Rigging - Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionCLICK HERE for more information about this course and to book online.
VOC

Voc can be provided for this course

Intermediate and Advanced Rigging Training Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Intermediate and Advanced Rigging Package

6 Days | $1599

3 days per course. Enrolment date is for Intermediate Rigging and courses may not run consecutively. You will be contacted to confirm both dates once receiving your application.

2018
  • December - 17
2019
  • January - 21
  • February - 18
  • March - 18
  • April - 8
  • May - 13
  • June - 10
Advanced Rigging - Standard Course

5 Days | $875

The standard course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this course and to book online.
VOC

Voc can be provided for this course

Intermediate and Advanced Rigging Training Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Note a High Risk Work Licence (HRWL) fee applies to the above course. A $95 fee applies to participants who do not hold a current WA issued HRWL. A $74.55 fee applies to participants who already hold a current WA issued HRWL in order to add a new licence class to the existing HRWL. Fees are directly payable to Worksafe WA.

Frequently Asked Questions

How to get a riggers ticket?

Do I need to do Dogging before Basic Rigging?

Do I need to do Basic Rigging before Intermediate Rigging?

Do I need to do Intermediate Rigging before Advanced Rigging?