Gas Transmission and Distribution Training Perth


Site Skills Training delivers high-quality training courses in all areas of Gas Transmission and Distribution Training. Our training courses are delivered from our Perth training facility at 72-80 Belgravia St,


Gas Transmission and Distribution Training provides students with the necessary skills and knowledge to operate and maintain gas compressor stations and transmission and distribution networks. This includes HSE, emergency response and permit to work.

A list of the Gas Transmission and Distribution courses that Site Skills Training offers are outlined below.

Gas Facility Operations & Maintenance Statutory Obligations Training

Gas Facility Operations & Maintenance Statutory Obligations is an essential course (ID 838) for operation and maintenance of gas transmission pipelines. It identifies sources of pipeline statutory obligations arising out of the pipeline licence, standards, codes of practice and legislation. Prior consultation may be required to customise this course. An optional compliance report may be prepared for your company in collaboration with internal subject matter experts.

Standard Course

1 Day | $495

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

1 Day

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
Standard Course

1 Day | $495

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

1 Day

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.

High Pressure Gas Receipt Facility Safety Competency Training

High Pressure Gas Receipt Facility Safety Competency enables employees to work safely and competently at custody transfer/meter stations.

High Pressure Gas Receipt Facility Safety Competency provides a hands-on site-based learning experience for operators and maintainers of gas receipt stations, typically at mine sites and power stations.

High Pressure Gas Receipt Facility Safety Competency includes:

  • an overview of gas transmission pipelines,
  • gas safety,
  • gas testing,
  • pipeline components,
  • instrument/ electrical,
  • SCADA and control systems,
  • process and instrumentation diagrams,
  • filter vessel operation,
  • water bath heater operation,
  • pressure reduction system operation,
  • fuel gas system overview and gas system emergency response.

Customisation consultancy may be required for this course.

Standard Course

1 Day | $995

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

1 Day

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
Standard Course

1 Day | $995

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

1 Day

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.

Introduction to Gas Pipeline Engineering Training

Introduction to Gas Pipeline Engineering (ID 288) is an essential introductory course that provides an overview of pipeline engineering. This course includes an overview of petroleum geology, reservoir and well equipment, extracting and processing, pipeline facilities, hydrocarbon properties, AS2885, statutory requirements overview, pipeline components, gas analysis, SCADA and control systems, process and instrumentation diagrams, pigging, corrosion control, gas compression and flow measurements.

After successfully completing the course, students should be able to:

  • Explain the principles of petroleum geology, extraction and processing
  • Describe the functions of typical components on gas pipeline facilities
  • Describe the properties of hydrocarbons and basics of hydrocarbons processing
  • Explain the principles of operation of typical pipeline instruments, monitoring and control systems (incl. SCADA)
  • Explain the principles of operation of gas analysis systems including moisture analysers, gas chromatographs, densitometers, calorimeters
  • Explain the principles of pigging
  • Explain the principles of gas compression
  • Explain the principles of rotating equipment, lubrication and bearings
  • Explain the principles of corrosion control
  • Explain the principles of gas measurement
  • Interpret process and instrumentation diagrams for a facility
  • Explain the purpose of AS2885 and describe its key parts

Standard Course

3 Days | $1495

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
Standard Course

3 Days | $1495

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.

Introduction to the Oil and Gas Industry Training

Introduction to the Oil and Gas Industry is an essential introductory course (ID 2712) that provides an overview of pipeline engineering. This course includes an overview of petroleum geology, reservoir & well equipment, extraction and processing, pipeline facilities, hydrocarbon properties, AS2885, statutory requirements overview, pipeline components, gas analysis, SCADA and control systems, process and instrumentation diagrams, pigging, corrosion control, gas compression and flow measurements.

Student who complete the courses should be able to undertake the following tasks

  • Explain the principles of petroleum geology, extraction and processing
  • Describe the functions of typical well and hydrocarbons processing facilities
  • Describe the properties of hydrocarbons
  • Explain the principles of operation of typical instruments, monitoring and control systems
  • Explain the principles of pigging
  • Explain the principles of compression
  • Explain the principles of rotating equipment, lubrication and bearings
  • Explain the principles of corrosion control
  • Interpret process and instrumentation diagrams for a facility

Standard Course

3 Days | $1500

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
Standard Course

3 Days | $1500

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.

Metering Station Operations Training

Metering Station Operations provides an overview of the Meter Station design and operating principles and parameters as well as installed equipment. This is a customised course to enable operators to gain skills & knowledge necessary to operate the station.

Standard Course

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
Standard Course

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.

Pipelines Gas & Liquid Petroleum for Maintenance Engineers and Professionals Training

Pipelines Gas & Liquid Petroleum for Maintenance Engineers and Professionals is an essential course (ID 871) for technical and maintenance personnel associated with the operation and maintenance of gas and liquid petroleum pipelines in Australia. It provides a comprehensive and practical overview of AS2885.3. It identifies key areas of the standard and how each of these clauses translates into operational and maintenance activities. Prior consultation may be required to customise this course. An optional compliance report may be prepared for your company in collaboration with internal subject matter experts.

Standard Course

1 Day | $495

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

1 Day

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
Standard Course

1 Day | $495

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

1 Day

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.

Pipelines Gas & Liquid Petroleum for Onshore Pipeline Engineers Training

Pipelines Gas & Liquid Petroleum for Onshore Pipeline Engineers is an essential course (ID 861) for engineering and technical personnel associated with the design, construction, commissioning, operation and maintenance of gas and liquid onshore gas and liquid petroleum pipelines in Australia. It provides a comprehensive coverage of all parts of AS2885. Pipelines Gas & Liquid Petroleum for Onshore Pipeline Engineers training includes completion of workplace related assignments to demonstrate consolidation and integration of learning in industry-relevant tasks.

Standard Course

4 Days | $1995

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

4 Days

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
Standard Course

4 Days | $1995

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

4 Days

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.

Pipelines Gas & Liquid Petroleum for Project Managers Training

Pipelines Gas & Liquid Petroleum for Project Managers is an essential course (ID 873) for project management personnel associated with the design, construction and commissioning of gas and liquid petroleum pipelines in Australia. It provides an overview of the requirements of AS2885 from a project management perspective.

Standard Course

1 Day | $495

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

1 Day

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.
Standard Course

1 Day | $495

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

1 Day

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 6500 0114 or email perth.training@site.edu.au for more information.

Poly Welding (Butt Welding) Training

Poly Welding (Butt Welding) Training

Poly Welding (Butt Welding) provides participants with the necessary skills and knowledge required to carry out polyethylene welding, also known as poly welding, using butt welding equipment.

  • Identifying materials being used in the installation as compatible for welding using butt welding methods
  • Calculating appropriate welding parameters to be used
  • Maintaining and calibrating welding equipment
  • Performing welding
  • Assessing quality of welded joints made

Standard Course

1 Day | $495

The standard course includes training and assessment. Inclusive of GST if relevant.

VOC

Voc can be provided for this course

Standard Course

1 Day | $495

The standard course includes training and assessment. Inclusive of GST if relevant.

2018
  • November - 26
  • December - 17
2019
  • February - 25
  • March - 25
  • April - 15
  • May - 20
  • June - 17
VOC

Voc can be provided for this course

Poly Welding (Electrofusion Welding)

Poly Welding (Electrofusion Welding) Training

Poly Welding (Electrofusion Welding) provides participants with the necessary skills and knowledge required to carry out polyethylene welding, also known as poly welding, using electrofusion welding equipment.

  • Identifying materials being used in the installation as compatible for welding using electrofusion welding methods
  • Calculating appropriate welding parameters to be used
  • Maintaining and calibrating welding equipment
  • Performing welding
  • Assessing quality of welded joints made

Standard Course

1 Day | $495

The standard course includes training and assessment. Inclusive of GST if relevant.

VOC

Voc can be provided for this course

Standard Course

1 Day | $495

The standard course includes training and assessment. Inclusive of GST if relevant.

2018
  • November - 27
2019
  • February - 26
  • March - 26
  • April - 16
  • May - 21
  • June - 18
VOC

Voc can be provided for this course