Health & Safety Training Onsite


Site Skills Training delivers high-quality courses in all areas of Onsite Health and Safety Training. Training & Assessment can be scheduled and conducted onsite at the premises of the industry clients.

Health and Safety training covers a vast array of skills necessary for safe work practices across all industries. Courses range from essential base level safety courses to high end safety and risk management for supervisors and management.

A list of the Work Health and Safety courses that Site Skills Training offers are outlined below.

Incident Investigation Root Cause Analysis (RCA) and Problem Solving Training

Incident Investigation Root Cause Analysis (RCA) and Problem Solving Training (ID 1825) provides technical personnel and managers who are required to undertake incident investigations as part of their job role. This course provides the underpinning knowledge and necessary skills required to solve routine and non-routine problems, correct investigation techniques and how to drill down to the root cause. Root Cause Analysis (RCA) is a popular and well established technique to assist people in answering the question of 'Why' the problem occurred in the first.

This 2-day course includes a workshop for trainees to work through case studies to complete incident investigations and propose solutions to address root causes. Trainees are required to bring workplace incidents that will be used for in-class activities.

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact us on 1300 700 080 or email onsite.training@site.edu.au for more information.
Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact us on 1300 700 080 or email onsite.training@site.edu.au for more information.

Low Voltage Rescue (LVR) and CPR Training

This training package includes both UETTDRRFO6B Perform rescue from a live LV panel and HLTAID001 Provide cardiopulmonary resuscitation.

Low Voltage Rescue (LVR) Training

Low Voltage Rescue (LVR) Training covers the performance of rescue procedures from live Low Voltage (LV) apparatus, not including overhead lines and underground cables in the work place. It specifies the mandatory requirements of rescue from a live LV panel and how they apply in the context of transmission, distribution or rail work functions. It encompasses responsibilities for, health, safety and risk management processes at all operative levels and adherence to safety practices as part of the normal way of doing work.

CPR Training

CPR - Cardiopulmonary Resuscitation course looks at the application of compressions and rescue breathing when a person is unresponsive and breathing abnormally. This course covers CPR to sustain brain function and life until medical support arrives. This course follows ARC guidelines.

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact us on 1300 700 080 or email onsite.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Low Voltage Rescue Training (LVR Training) Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact us on 1300 700 080 or email onsite.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Low Voltage Rescue Training (LVR Training) Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

MSSS Mine Site Safety Supervisor Training

The Mine Site Safety Supervisor course covers safety, management and legal responsibilities regarding OHS and mining legislation. The course aims at informing the participant how to isolate and minimise risk at their work site.

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact us on 1300 700 080 or email onsite.training@site.edu.au for more information.
Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact us on 1300 700 080 or email onsite.training@site.edu.au for more information.

Standard 11 (S11) Generic Induction (GI) Safety Training

The Energy Skills Queensland Generic Induction (GI) Safety program equips resource workers with core risk assessment and safety skills required to operate safely on work sites.

The 3 day Standard 11 (S11) Generic Induction (GI) Safety course covers the health and safety requirements needed by workers to be inducted onto Queensland Coal and Metalliferous mining sites. The course meets all the requirements for Recognised Standard 11 training set by the Queensland Mining Safety Inspectorate. It includes the 6 nationally recognised units of competency required to meet the training needs of the Standard 11 for induction.

The GI is:

  • A nationally-recognised program
  • Industry endorsed
  • Activity and experience-based learning
  • Used by mining companies, contractors and labour-hire firms
  • Fully compliant with the appropriate legislation
  • Improved trainer resources
  • A centralised, standardised and high-quality program

For further information refer to the following documents;

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact us on 1300 700 080 or email onsite.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Standard 11 (S11) Generic Induction (GI) Safety Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact us on 1300 700 080 or email onsite.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Standard 11 (S11) Generic Induction (GI) Safety Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Manual Handling Training

The most common workplace injuries in Australia are sprains and strains caused by the stresses due to manual tasks including lifting and moving materials manually. Most jobs involve some type of force and/or repetition, using the body to move, lift or hold an object, from loading pallets, erecting scaffold to entering data into a computer.

Undertake Manual Handling is designed to give workers and managers the necessary skills and techniques to stop and assess their work activities to reduce the impact on the body. Including redesign/simple alterations; correct lifting techniques; body mechanics and maintenance.

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact us on 1300 700 080 or email onsite.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Undertake Manual Handling Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact us on 1300 700 080 or email onsite.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Undertake Manual Handling Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page.

Undertake Root Cause Analysis Training

Undertake Root Cause Analysis aims to provide candidates with the necessary skills to identify the origins a 'problem' and apply a methodical process to solve the problem. Root Cause Analysis (RCA) is a popular and well established technique to assist people in answering the question of 'Why' the problem occurred in the first place.

  • Types of causes - Physical, Human, Organisational
  • The Root Cause Analysis Process - Define the problem, Collect data, Identify possible causal factors, Identify the Root Cause(s), Recommend and implement solutions.
  • Practical exercises using RCA methods

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact us on 1300 700 080 or email onsite.training@site.edu.au for more information.
Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact us on 1300 700 080 or email onsite.training@site.edu.au for more information.