Oil & Gas Training Brisbane


Site Skills Training delivers high-quality training courses in all areas of Oil & Gas Training. Our training courses are delivered from our Brisbane training facility at Brisbane CBD, Brisbane City and Brisbane Southside,

Common Industry Competencies (CIC) Standard

Safer Together and the Queensland Natural Gas E&P Industry has recently implemented the Common Industry Competencies (CIC) Standard. This standard will enhance the safety competency of all personnel in the industry whilst driving consistency and cost efficiency to recognise standards of competency for industry workers.

Starting 1 July, 2017, the requirements defined in the CIC Standard will apply to all facilities in the Queensland Natural Gas E&P Industry.

This package course contains the below 6 units of competency. These courses may not run consecutively.

Confined Spaces - Refresher required every 3 years

Confined Space Training Brisbane aims to give participants the necessary skills and knowledge to safely and competently enter and work in confined spaces. Training and assessment is compliant with AS2865 including but not limited to:

  • Applicable legislations and company confined space procedures
  • Definitions and types of confined spaces
  • Hazard identification and risk management procedures
  • Hazardous atmospheres including gas monitoring techniques
  • Isolation, purging, ventilation; permits and authority
  • Roles and responsibilities of team including standby
  • Rescue equipment and procedures
  • Industry case studies

Gas Test Atmospheres - Refresher required every 3 years

Employing the correct detection and monitoring techniques of potentially hazardous gases is a crucial aspect of entering and working in confined spaces or other applicable environments.

This course aims to give participants the necessary skills and knowledge to undertake testing and sampling of hazardous environments, including:

  • types and selection of gas detectors,
  • sampling regimes and techniques,
  • inspections and maintenance,
  • calibration and bump tests,
  • risk management when sampling,
  • gas types,
  • characteristics and toxicity,
  • lower and upper explosive limits,
  • permits,
  • company gas testing procedures and applicable legislation.

Operate Breathing Apparatus - Refresher required every year

This program aims to provide candidates with the necessary skills to safely wear Breathing Apparatus in a hazardous or toxic environment. The course covers the following:

  • Equipment and pre-donning inspections
  • Correct donning of breathing apparatus
  • Operate breathing apparatus
  • Move and search in a reduced visibility environment - smoke, dust, darkness
  • Communication procedures and the use of control tally boards
  • Use of Breathing Apparatus in emergencies and/or first response situations
  • Cleaning, maintenance and storage of Breathing Apparatus

CPR - Refresher required every year

CPR - Cardiopulmonary Resuscitation course looks at the application of compressions and rescue breathing when a person is unresponsive and breathing abnormally. This course covers CPR to sustain brain function and life until medical support arrives. This course follows ARC guidelines.

First Aid - Refresher required every 3 years

This provides the participants with the skills and knowledge to confidently manage emergency situations, providing care for the ill or injured until medical aid arrives. The course includes CPR.

It is suitable to both people in workplaces and members of the public who want training in first aid. All components of the course are written to the ARC guidelines.

Work at Heights - Refresher required every 3 years

This training is aimed at providing candidates with the necessary skills and knowledge to undertake work at heights safely and competently, covering selection, inspection and safe use of equipment, risk management, and requirements of relevant Australian Standards, company procedures and legislation.

Standard Course

4 Days | $1100

The standard course includes training and assessment. Inclusive of GST if relevant.

ISI Induction Certificate Holders

4 Days | $1000

For individuals who've previously completed the Industry Safety Induction.

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.
Standard Course

4 Days | $1100

The standard course includes training and assessment. Inclusive of GST if relevant.

2017
ISI Induction Certificate Holders

4 Days | $1000

For individuals who've previously completed the Industry Safety Induction.

2017
Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.

IADC Basic Casing & Cementing

This course covers the principles and practices of designing, planning and conducting successful casing and cement jobs. It takes participants from initial casing depth and size selection, casing and linear design procedures, casing running practices, and planning and executing primary cementing through remedial cementing and plugging operations.. This course is accredited by the International Association of Drilling Contractors through our training partners.

The course provide the knowledge and competency which drilling personnel require to handle well control situations.

Standard Course

2 Days | $2850

The Standard course includes the assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information. For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

delivery_type_no_date_descriptionGroup, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.
Standard Course

2 Days | $2850

The Standard course includes the assessment. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information. For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.

IADC Stuck Pipe Prevention Training

Site Skills Training in collaboration with our training partner, Insituto Technico Del Petroleo (ITP) provides an accredited and globally recognised Stuck Pipe Prevention Course aimed at staff working on onshore and offshore rigs. The courses are accredited by the International Association of Drilling Contractors through our training partners.

Standard Course

2 Days | $1500

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

delivery_type_no_date_descriptionGroup, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.
Standard Course

2 Days | $1500

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.

IADC Well Sharp (Driller Level) Training

Site Skills Training in collaboration with our training partner, Insituto Technico Del Petroleo (ITP) provide an accredited and globally recognised Well Control Training Program aimed at staff working on onshore and offshore rigs. This course is accredited by the International Association of Drilling Contractors through our training partners.

The course provide the knowledge and competency which drilling personnel require to handle well control situations.

Standard Course

5 Days | $1750

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

delivery_type_no_date_descriptionGroup, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.
Standard Course

5 Days | $1750

The standard course includes training and assessment. Inclusive of GST if relevant.

2017
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.

IADC Well Sharp (Supervisory Level) Training

Site Skills Training in collaboration with our training partner, Insituto Technico Del Petroleo (ITP) provide an accredited and globally recognised Well Control Training Program aimed at staff working on onshore and offshore rigs. This course is accredited by the International Association of Drilling Contractors through our training partners.

The course provide the knowledge and competency which drilling personnel require to handle well control situations.

Standard Course

5 Days | $1750

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

delivery_type_no_date_descriptionGroup, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.
Standard Course

5 Days | $1750

The standard course includes training and assessment. Inclusive of GST if relevant.

2017
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.

IWCF Well Control L2

Site Skills Training Primary Center accreditation is currently in progress. Price listed above is inclusive of GST

Site Skills Training provides an accredited and globally recognised Well Control Training Program aimed at staff working on onshore and offshore rigs. This course is accredited by the International Well Control Forum (IWCF) through our training partners.

The course provides the knowledge and competency which drilling personnel require to handle well control situations.

IWCF Well Control Level 2

5 Days | $1250

The Standard course includes the assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.

IWCF Level 2 Course Page

IWCF Well Control Level 3

5 Days | $1750

The Standard course includes the assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.

IWCF Level 3 Course Page

IWCF Well Control Level 4

5 Days | $1750

The Standard course includes the assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.

IWCF Level 4 Course Page

Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

delivery_type_no_date_descriptionGroup, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.
IWCF Well Control Level 2

5 Days | $1250

The Standard course includes the assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.

IWCF Level 2 Course Page

IWCF Well Control Level 3

5 Days | $1750

The Standard course includes the assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.

IWCF Level 3 Course Page

IWCF Well Control Level 4

5 Days | $1750

The Standard course includes the assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.

IWCF Level 4 Course Page

Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.

IWCF Well Control L3

Site Skills Training Primary Center accreditation is currently in progress. Price listed above is inclusive of GST

Site Skills Training provides an accredited and globally recognised Well Control Training Program aimed at staff working on onshore and offshore rigs. This course is accredited by the International Well Control Forum (IWCF) through our training partners.

The course provides the knowledge and competency which drilling personnel require to handle well control situations.

Standard Course

5 Days | $1750

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

delivery_type_no_date_descriptionGroup, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.
Standard Course

5 Days | $1750

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.

IWCF Well Control L4

Site Skills Training Primary Center accreditation is currently in progress. Price listed above is inclusive of GST.

Site Skills Training provides an accredited and globally recognised Well Control Training Program aimed at staff working on onshore and offshore rigs. This course is accredited by the International Well Control Forum (IWCF) through our training partners.

The course provides the knowledge and competency which drilling personnel require to handle well control situations.

Standard Course

5 Days | $1750

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Standard Course

5 Days | $1750

The Standard course includes the assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information. For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

delivery_type_no_date_descriptionGroup, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.
Standard Course

5 Days | $1750

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Standard Course

5 Days | $1750

The Standard course includes the assessment. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information. For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.

IWCF Well Intervention L3

Site Skills Training provides an accredited and globally recognised Well Intervention Training Program aimed at staff working on onshore and offshore rigs. This course is accredited by the International Well Control Forum through our training partners.

The course provide the knowledge and competency which Well Intervention personnel require on site.

Standard Course

5 Days | $1750

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

delivery_type_no_date_descriptionGroup, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.
Standard Course

5 Days | $1750

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.

IWCF Well Intervention L4

Site Skills Training provides an accredited and globally recognised Well Intervention Training Program aimed at staff working on onshore and offshore rigs. This course is accredited by the International Well Control Forum through our training partners.

The course provides the knowledge and competency Well Intervention personnel require on site.

Standard Course

5 Days | $1750

The Standard course includes the assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information. For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

delivery_type_no_date_descriptionGroup, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.
Standard Course

5 Days | $1750

The Standard course includes the assessment. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information. For individuals, you can register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.

IWCF Well Intervention Level 2 Training

Site Skills Training provides an accredited and globally recognised Well Intervention Training Program aimed at staff working on onshore and offshore rigs. This course is accredited by the International Well Control Forum through our training partners.

The course provide the knowledge and competency which Well Intervention personnel require on site.

Standard Course

5 Days | $1750

The standard course includes training and assessment. Inclusive of GST if relevant.

delivery_type_no_date_descriptionRegister your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

delivery_type_no_date_descriptionGroup, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.
Standard Course

5 Days | $1750

The standard course includes training and assessment. Inclusive of GST if relevant.

Register your interest in this course by using the Apply Now! button and our facility will contact you when the next public course is available. Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on for more information.
Onsite

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table.

Group, Corporate and/or Onsite training bookings can be scheduled to suit your time table. Please contact us on 07 3114 5188 or email wellcontrol@site.edu.au for more information.