Process Plant Operations Training Brisbane


Site Skills Training delivers high-quality training courses in all areas of Process Plant Operations Training. Our training courses are delivered from our Brisbane training facility at Brisbane CBD and Brisbane Southside,


Process Plant Operations Training provides students with the skills and knowledge to undertake process plant operations including; flange dismantling and assembly, gasket identification, and knowledge of pressure boundary flange joint assembly.

A list of the Process Plant Operation courses that Site Skills Training offers are listed below.

Advanced Process Control Training

This course has been prepared to build on the concepts of process dynamics explored in our Process Control course. This course gives a practical introduction to the application of advanced control from the standpoint of modelling process dynamics and selecting an appropriate advanced control technique to reflect the process dynamics.

It is an intensive course which relies heavily on the use of many computer simulation practical examples to explore advanced control strategies. The course runs as a two day course assuming the important fundamentals of process dynamics are understood. A three day course to including the fundamentals of process dynamics can be provided. The course explores some of the advanced classical methods and techniques through hands-on testing of algorithm performance.

Standard Course

2 Days

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.
Standard Course

2 Days

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.

Control Loop Tuning Training

How many of your control loops sit in manual? How many loops have such low gains and long integral times that they are automatic in name only? Can an auto tuner give you the control loop performance you require? This course has been prepared to equip operators and engineers with the answers.

In our experience, the teaching of control theory does not adequately explain the concept of process dynamics and hence many don’t understand how to match the loop tuning with the actual process dynamics. This program aims to provide an understanding of dynamics and tuning through practical exercise.

Standard Course

1 Day

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.
Standard Course

1 Day

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.

Flange Integrity Level 1 Training

Flange Integrity - Level 1 training (ID 2709) provides the trainee with the necessary underpinning knowledge and practical skills to make and break flanged joints with manual bolt-up methods. At the end of this course all participants will be competent in ensuring the integrity of flanges on pipework and vessels in process plants.

This course covers:

  • Flange types
  • Flange dismantling
  • Flange inspection
  • Flange assembly
  • Gasket types
  • Gasket identification
  • Assembly instruction
  • Knowledge of relevant parts of ASME PCC-1-2013 Guidelines for Pressure Boundary Bolted Flange Joint Assembly

Standard Course

1 Day | $735

The Standard course includes the assessment. Inclusive of GST if relevant.

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.
Standard Course

1 Day | $735

The Standard course includes the assessment. Inclusive of GST if relevant.

2017
  • July - 12
  • August - 2,23
  • September - 13
  • October - 5,26
  • November - 15
  • December - 6
Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.

Flange Integrity Level 2 Training

Flange Integrity - Level 2 (ID 2824) provides the trainee with the necessary underpinning knowledge and practical skills to make and break flanged joints with manual bolt-up methods and then to proceed to next level of using Hydraulic Torquing tools. At the end of this course all participants will be competent in ensuring the integrity of flanges.

Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.
Onsite

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 07 3177 9912 or email brisbane.training@site.edu.au for more information.

Introduction to Oil and Gas Training

This course is designed to give personnel with limited experience in oil and gas industry, a basic overview of oil and gas production process, and associated utilities. We believe it is vitally important that personnel new to oil and gas understand the bigger picture before beginning to learn ‘on the job’.

This course explains how oil and gas is located, how the reservoir produces and flows via wells and how the oil and gas is processed and transported to its destination.

Standard Course

3 Days

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.
Standard Course

3 Days

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.

Non Technical Overview: LNG Training

The course aims to provide support personnel with no technical knowledge with a basic overview of the LNG industry. We believe it is vitally important that support personnel understand the language of LNG.

This course explains the purpose and history of liquefying methane for transport, where the methane originates from and how the methane is processed and transported to its destination.

Our course leader has a particular talent for making the complex seem simple and hundreds of people and organizations around the world have benefited from his delivery of this program.

Standard Course

1 Day

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.
Standard Course

1 Day

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.

Non Technical Overview: Oil and Gas Training

The course aims to provide support personnel with no technical knowledge with a basic overview of the oil and gas industry. We believe it is vitally important that support personnel understand the language of oil and gas.

This course explains how oil and gas is located, how the reservoir produces and flows via wells and how the oil and gas is processed and transported to its destination.

Our course leader has a particular talent for making the complex seem simple and hundreds of people and organizations around the world have benefitted from his delivery of this program.

Standard Course

2 Days

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.
Standard Course

2 Days

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.

Operational Excellence in LNG Training

Engineers learn theory and operators learn from experience, but how do we ensure both theory and experience are combined to full advantage? Our experience of trouble shooting operational problems and training operators leads us to believe that the time is not always taken to familiarise operators with the fundamentals of science, process control and their application to day to day operations.

This course has been prepared to give a practical understanding from the fundamentals of science up to the various LNG processes, combined with modern control systems and the pursuit of optimum performance.

This is an intensive two week course which relies heavily on the use of many computer simulation practical examples to explore engineering fundamentals, control and optimisation.

The course has been delivered numerous times to LNG operating personnel to rave reviews. It would seem operators like to have answers to the many questions they have not understood, and the longer their experience the more questions they have. Believe it or not the duration has never been an issue and compared to the length of a formal education the investment appears to be considered exceptionally worthwhile.

Standard Course

10 Days

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.
Standard Course

10 Days

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.

Practical Process Safety Training

This is not yet another session about the Baker report, the Cullen report, Montara or Macondo (Deepwater Horizon). Nor does this course confuse slips, trips and falls with process safety. Inherent safety, safety integrity levels, HAZOP, bow ties, LOPA, and quantitative risk assessment will all be covered but not in conventional fashion; everybody needs to understand process safety not just engineers.

The conclusions from major incident reports are often the same, we fail to manage process safety proactively, so if we know the answer why do major incidents continue to occur? The answer is simple; you can’t be proactive if your culture is reactive. This course bridges the gap between theory and practice, focussing on the outcomes we all desire and deserve.

Standard Course

3 Days

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.
Standard Course

3 Days

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.

Process Control Training

This course has been prepared to meet the specific requirements of engineers, control room operators and instrument specialists who together, need to gain confidence and competence in control.

In our experience, the teaching of control theory does not adequately explain the concept of process dynamics and hence many people have been introduced to control theory but don’t understand how to match the appropriate techniques with the actual process dynamics. This program aims to provide understanding of process control as opposed to familiarisation with control, through practical exercise.

Standard Course

2 Days

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.
Standard Course

2 Days

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.

Process Engineering for Operations Training

Engineers learn theory and operators learn from experience, but how do we ensure both theory and experience are combined to full advantage?

Our experience of trouble shooting operational problems and training operators leads us to believe that the time is not always taken to familiarise operators with the fundamentals of science, process control and their application to day to day operations. This course has been prepared to give a practical understanding of process engineering in the real world, combined with modern control systems and the pursuit of optimum performance. It is an intensive course which relies heavily on the use of many computer simulation practical examples to explore engineering fundamentals, control and optimisation.

Standard Course

3 Days

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.
Standard Course

3 Days

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.

Understanding and Optimising Centrifugal Compression Training

Engineers learn theory and operators learn from experience, but how do we ensure both theory and experience are combined to full advantage?

Both groups need to understand the fundamental principles, the interaction with the driver limitations, be able to understand the application of process control and be able to spot problems. This course has been prepared to give a practical understanding of centrifugal compression in the real world, combined with modern control systems and the pursuit of optimum performance.

It is an intensive course which relies heavily on the use of many computer simulation practical examples to explore compressor operation, its control and optimisation.

With common first days between our compressor courses, centrifugal, screw and reciprocating compression can be combined in our compressor week to give a comprehensive overview of the whole compressor family.

Standard Course

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.
Standard Course

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.

Understanding and Optimising Plant Utilities Training

Many training courses focus on the process, but the process can’t work without the power, air, heating, cooling, waste disposal, chemicals and water the utility systems provide. The focus of attention on the process can also lead to a degree of neglect in the operation and maintenance of utilities that ultimately affects the process anyway.

This course has been prepared to give a practical understanding of plant utilities, their importance to the process, the start up sequence of a plant and the emergency response required in the event of loss of power and air. The course also examines the opportunities for energy efficiency and the relationship with plant emissions. It is an intensive course which relies heavily on the use of practical examples and exercises to explore utility operation, control, and optimisation.

Standard Course

2 days

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.
Standard Course

2 days

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.

Understanding and Optimising Reciprocating Compression Training

Engineers learn theory and operators learn from experience, but how do we ensure both theory and experience are combined to full advantage?

Both groups need to understand the fundamental principles, the interaction with the driver limitations, be able to understand the application of process control and be able to spot problems. This course has been prepared to give a practical understanding of reciprocating compression in the real world, combined with modern control systems and the pursuit of optimum performance.

It is an intensive course which relies heavily on the use of many computer simulation practical examples to explore compressor operation, its control and optimisation. With common first days between our compressor courses, reciprocating, screw and centrifugal compression can be combined in our compressor week to give a comprehensive overview of the whole compressor family.

Standard Course

2 days

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.
Standard Course

2 days

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.

Understanding and Optimising Screw Compression Training

Engineers learn theory and operators learn from experience, but how do we ensure both theory and experience are combined to full advantage?

Both groups need to understand the fundamental principles, the interaction with the driver limitations, be able to understand the application of process control and be able to spot problems. This course has been prepared to give a practical understanding of screw compression in the real world, combined with modern control systems and the pursuit of optimum performance.

It is an intensive course which relies heavily on the use of many computer simulation practical examples to explore compressor operation, its control and optimisation. With common first days between our compressor courses, screw, reciprocating and centrifugal compression can be combined in our compressor week to give a comprehensive overview of the whole compressor family.

Standard Course

2 Days

delivery_type_no_date_descriptionGroup, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.
Standard Course

2 Days

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our office for a quote on course cost.