Work at Heights Training Darwin

RIIWHS204D Work Safely at Heights
Site Skills

Many job tasks are required to be completed at heights, this possess high risk. Work at Heights Training will ensure you're trained to safely work at heights.

Standard Course i1 Day$315
Night Course i2 Nights$315
Day - Refresher Course i5 Hours$225
Night - Refresher Course i5 Hours$225
Work at Heights and EWP Package i3 Days$776
Confined Spaces and Work at Heights Package i2 Days$567

Darwin Work at Heights Training Availability

To apply for a course simply click on one of the available dates

Night Course

2 Nights | $315

The Night course is for the Standard course only. Inclusive of GST if relevant.

< >
Night - Refresher Course

5 Hours | $225

The night refresher course is for experienced operators only. Inclusive of GST if relevant.

< >
Work at Heights and EWP Package

3 Days | $776

The course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this training package and to book online.
Confined Spaces and Work at Heights Package

2 Days | $567

The course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Work at Heights Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page

Standard Course

1 Day | $315

The standard course includes training and assessment. Inclusive of GST if relevant.

2017
Night Course

2 Nights | $315

The Night course is for the Standard course only. Inclusive of GST if relevant.

2017
  • July - 4
  • August - 1,29
  • September - 26
  • October - 24
  • November - 21
Day - Refresher Course

5 Hours | $225

The refresher course is for experienced operators only. Inclusive of GST if relevant.

2017
Night - Refresher Course

5 Hours | $225

The night refresher course is for experienced operators only. Inclusive of GST if relevant.

2017
Work at Heights and EWP Package

3 Days | $776

The course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this training package and to book online.
Confined Spaces and Work at Heights Package

2 Days | $567

The course includes training and assessment. Inclusive of GST if relevant.

CLICK HERE for more information about this training package and to book online.
Onsite

Group, Corporate and/or On-Site bookings can be scheduled to suit your time table. Inclusive of GST if relevant.

Group, Corporate and/or On-Site training bookings can be scheduled to suit your time table. Please contact our facility on 08 8947 5050 or email darwin.training@site.edu.au for more information.
VOC

Voc can be provided for this course

Work at Heights Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page

Course Overview

This course is aimed at providing candidates with the necessary skills and knowledge to undertake work at heights safely and competently, covering selection, inspection and safe use of equipment; risk management; and requirements of relevant Australian Standards, company procedures and legislation. The course practically applies these and other safe work practices.

Refresher training is recommended every 2 years for Work safely at heights and Enter and work in confined spaces. 

Verification of Competency

Work at Heights Verification of Competencies can be delivered on-site and at our training facility. For more information, please contact the facility, or view our VOC page

Payment Options

Full payment for courses up to $1,500 must be made before the commencement of the course. For courses that cost over $1,500, Site Skills Training will hold an initial deposit of $1,500, with the balance to be paid upon commencement of the course.

Payment can be made via eftpos, cash or cheque. For billing information including who to write a cheque to, please email payment@site.edu.au or call 1300 700 080.

Qualification Outcomes

Upon successful completion of this unit a Statement of Attainment will be issued.

Further Information

Are you interested in this course? For more information about the course or how to apply, email darwin.training@site.edu.au or call 08 8947 5050 or you can Apply Online.

Working at Heights Training requires a Unique Student Identifier (USI) , you can still complete the training without a USI, though Site Skills Training is unable to provide you with your completion certificate until you provided us with your USI. To apply for a free USI visit the USI website or contact our facility.

Suitable For

This unit is recommended for those working in Civil Construction, Coal Mining, Drilling, Extractive Industries, Metalliferous Mining or Infrastructure, and will be required to spend a great deal of time as a sentry or stand-by working at heights; whether on scaffolding, EWP or large equipment.

Course Delivery

Training and assessment is conducted at the Site Skills Training facility 1 Campion Rd, East Arm, NT 0820. Upon arrangement, training and courses can be conducted on-site at the premises of industry clients providing there a suitable infrastructure and industry training facilities.

Units of Competency

RIIWHS204D Work Safely at Heights

RPL

Not recommended

Work Opportunities

This course is designed to provide safe work procedures for those working in industries where working at heights is a requirement, but does not have direct work outcomes.

Further Opportunities

Working at Heights Training unit forms part of:

  • RII32015 - Certificate III in Drilling Oil/Gas (On shore)
  • RII30813 - Certificate III in Civil Construction Plant Operations
  • RII20213 - Certificate II in Surface Extraction Operations

Max Students

10

RTO32531

Find more courses

  • East Arm
  • 8,000 sqm

Courses available in Darwin